Here’s a 5-step guide to help you connect your COIN board to your computer, code it, and make it run… STEP 1: PLUG YOUR BOARD TO THE LAPTOP Either your device drivers are already installed and hence you will see the White LED (on the board) light up and perhaps you will also notice a
To upload code while the main processor is in deep sleep mode, unplug the device and simultaneously press the reset button on the board. While holding the reset button, plug the device back in. This action puts the board into download mode, allowing for code uploading. RTC based sleep: esp_sleep_enable_timer_wakeup(10 * 1000000); // 10 seconds
The Indusbaord is compatible with Arduino IDE and most of the Sensor and other libraries that work with Arduino and ESP 32 will also Work with INDUSBOARD. You can migrate and use most of the Arduino and ESP projects and Codes directly to INDUSBAORD. Here Is How you do it. Project Without Pheperials There are
Q. What is an IndusBoard Coin?A. IndusBoard Coin is one of the world’s most compact development boards, sized at just 3 centimeters. As the name suggests, its size is similar to a coin and hence it’s the perfect board for Wearable Electronics. Q. What is unique about IndusBoard Coin? A. First and foremost –it’s a
Analog Pins The IndusBoard coin has 16 analog pins that can be used through the analogRead() function. value = analogRead(pin, value); PWM Pins Most of the digital & analog pins can be used as PWM (Pulse Width Modulation) pins. There are a total of 26 PWM pins on the IndusBoard coin. analogWrite(pin, value); Digital Pins