skip to content

IndusBoard V2

TECH SPECS

Detailed breakdown of IndusBoard v2's advanced technical specifications.

Sensors

LUX sensor
10 + Proximity Sensor on I/O pads
10+ Capacitive Touch Sensors I/Os
3D Acceletometer
3D magnetometer
2 Temperature sensor
RTC
Touch + Air Gesture sensor

Connectivity

WiFi ( Both STA and AP at same time )
USB CDC ( Composite device works as USB , OTG , FTDI , HID all togather )
HID ( Acts as mouse and keyboard )
Inbuilt JTAG debugger
Type C OTG

Power

- Inbuilt 3.3 to 7V Regulation
- Light sleep mode (130 µA to 800 µA)
- Deep sleep mode (10–150 µA )
- WiFI power control modes

Processing

Xtensa LX7 processor: 32-bit Xtensa LX7 core from Cadence (Tensilica), which is an efficient RISC architecture optimized for embedded applications.
2 ULP RISC-V Co-processor

RAM: SRAM + 2Mb PSRAM
ROM: 128 KB of on-chip ROM for the bootloader and core functions. + 4Mb SIFFS memory
External SPI SD Card Support: Up to 32GB

Pheperials I/Os

30+ Super flexible I/o ( Any I/Os can be configured as other pheperials)
Multiple SPI
Multiple I2C
HID support
I2S support for Audio procession
DVI Port for camera and Image processing
Multi channel ADC ( Analog to Digital Converter )
TWAI ( Can Bus )

Ai Support

Support OV2640 and similar DVI Camera for AI Image Processing
Supports Tiny ML
Supports Edge Impulse
Support TensorFlow Lite